Gearbox NVI series for large tonnage injection molding machine

Description

Products Parameters

detail

①: The rated torque values listed below are calculated using a coefficient of 1. When calculating maximum usable horsepower, please consider a safety factor of 1.7. See Appendix 1 for details.
②: Weight may vary depending on the reducer ratio and configuration.
③: The oil quantity may vary depending on the ratio, gear oil viscosity, and other factors. Add the appropriate amount of oil based on the actual oil level gauge. For oil grades, see Appendix 2.

Size	Ratio（i）	Torque Mn（Nm）①	A（mm）	B（mm）	C（mm）	D（mm）	E（mm）	Weight（KG）②	Oli（L）③
160	8	5590	655	385	180	266	320	160	18
	10	6520
	12.5	6600
	14	6750
	16	6800
180	10	9300	732	432	200	296	360	230	26
	12.5	9500
	14	9700
	16	9800
	18	9850
200	10	13200	810	485	225	330	400	362	45
	12.5	13240
	16	13300
	18	13380
	20	13500
225	10	17600	907	545	250	360	450	665	66
	12.5	18200
	16	18300
	18	18350
	20	18280
250	16	33600	1020	570	310	410	600	960	70
	20	34100
300	16	45400	1160	685	350	450	670	1200	105
	17	46800
	20	47400
	22	46800
360	25	74500	1448	867	400	570	710	2200	160
	31.5	76900

Appendix 1 Load Service factor (SF)
Daily running time	4 hours			8 hours			16 hours			24 hours
Operations per hour	4 hours			8 hours			16 hours			24 hours			<10	100-	>200	<10	100-	>200	<10	100-	>200	<10	100-	>200
Operations per hour	200	200	200	200									<10		>200	<10		>200	<10		>200	<10		>200
Ⅰ	0.7	0.8	1	0.9	1	1.1	1	1.1	1.2	1.2	1.3	1.5
Ⅱ	1	1.1	1.3	1.1	1.2	1.3	1.2	1.4	1.5	1.4	1.5	1.6
Ⅲ	1.3	1.4	1.5	1.4	1.5	1.6	1.5	1.6	1.7	1.6	1.7	1.8
				Ⅰ：Even load
				Ⅱ：Uneven load, medium masses
				Ⅲ：Uneven load, greater masses
				The load Service factor fB refers to the various operating conditions of the gear; such as type of load, running time, operation frequency, output speed etc., and is therefore imperative when choosing the gear size.Based on our experience, a load factor fB=1.7 at 24-hour operation must be considered when choosing the gear.

Appendix 2 Recommended oil types
		Lubricant
Type of lubricant	Application	OIL	AMBIENT TEMPERATURE
Mineral oil	Reduction gearboxes	ISOVG220EP	-15°C- + 15°C -10°C ~+40°C
		ISOVG320EP
		Corresponding Lubricants
		Type	Brand-name	Type	Brand-name
		MELLANAOILBLASIA	IPAGIP	MOBILGEAR600XPOMALAEP	MOBILSHELL

Cooling method: Built in and external

products

Built-in:
Use a copper plate with better thermal conductivity to separate the oil cavity inside the reducer, and add a cover for the cooling water circulation pipeline externally to pass cooling water to better reduce the temperature rise of the reducer during operation.

Applicable models	160	180	200	225

products-2-2

External:
The motor pump and plate heat exchanger can reduce the amount of oil in the internal oil chamber, reduce the temperature rise, and reduce the weight of the reducer itself.

Applicable models	250	300	360

Main Features

In terms of energy conservation, the reducer employs precision helical gear meshing and high transmission efficiency (over 95%), significantly reducing energy loss during power transmission. Compared to conventional hydraulic motors, it helps reduce the overall energy consumption of injection molding machines by 20%-30%. With long-term use, it substantially cuts electricity costs for enterprises, aligning with the current industrial trend of energy efficiency and consumption reduction.

The NVI gearbox reducer delivers precise transmission ratios and high torque output. Equipped with an intelligent control system, it ensures accurate and controllable mold opening/closing and injection actions, minimizing process deviations. Its rapid response capability shortens the injection cycle, improving production efficiency by 10%-15%. This enables enterprises to produce more qualified products within the same timeframe, enhancing their competitiveness.